Results 1 to 10 of 10

Thread: Dji Led/Bluetooth extension and IOS APP - Hands on

  1. #1
    Full Blown Hucker BorisS's Avatar
    Join Date
    May 2011
    Location
    Austria, Vienna
    Posts
    3,435
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Dji Led/Bluetooth extension and IOS APP - Hands on

    Hi guys got the chance to check out the new led from DJI with it bluetooth extension.
    Actually like the new approach DJI is taking with the new GUI for their PC assistant.
    Better layout and more to the point. Before thing looked a little hacked together.
    Same goes for the IOS App. Nice clear structure.

    Overview of the client:

    General Basic View of your copters settings.



    Top Slider for arming on and off. Than under Basic settings you have the following options:



    Splitting up into Aircrft, preconfigured Mixer-Tables :



    Mounting IMU orientation and location for IMU and GPS


    RC Setting plus calibration:



    Gains, also nice possible to trim during flight ! Advanced is also included but not on this screenshot !



    And Tools, were you get the option to start the compass calibration :

    Last edited by BorisS; 04-24-2013 at 10:04 AM.
    CS8 conversion to X8 DJI WK-M Herkules III V3 ESCs
    DW CX4, DJI WK-M Herkules II V3 ESCs
    S800 - Z15 Gimbal GH1/GH2 Version
    ----------------------------------------------------------------------------------------------------
    FPV: QAV500/NAZA - TBS Discovery/Naza - Hoverthings VC450 & HT-FPV NAZA/OP CC
    Building TBS DISXO X8 modded AD6 FC and ESC 32

  2. #2
    Full Blown Hucker BorisS's Avatar
    Join Date
    May 2011
    Location
    Austria, Vienna
    Posts
    3,435
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Going on Advanced settings splitts into the following:



    Motor, start up speed:



    Failsafe and the different options



    IOC choosing On of Off and which controls used



    Gimbal on off an the gains and travel points



    Usual Voltage setting



    And limits



    Last TAB is More gives you an option to export import you settings. If i understood it correclty DJI will be offering a cloud service for this !



    Overall I like it. Since I am a osx user the steps to getting to config a bird were long. Boot up the Notebook get the Vmware to run a Windows version than start the assistant and physically connect via bluetooth. Actually it adds to safetly also, especially at the moment were you say should I double check and you dont since you dont want to hook up the assitant again, well with the app you will double check !

    Boris
    Last edited by BorisS; 04-24-2013 at 04:21 PM.
    CS8 conversion to X8 DJI WK-M Herkules III V3 ESCs
    DW CX4, DJI WK-M Herkules II V3 ESCs
    S800 - Z15 Gimbal GH1/GH2 Version
    ----------------------------------------------------------------------------------------------------
    FPV: QAV500/NAZA - TBS Discovery/Naza - Hoverthings VC450 & HT-FPV NAZA/OP CC
    Building TBS DISXO X8 modded AD6 FC and ESC 32

  3. #3
    Full Blown Hucker ChrisViperM's Avatar
    Join Date
    Jun 2012
    Location
    Cape Town - South Africa
    Posts
    1,854
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    As much as I am tending to get away from DJI, at least this App with the BT-module looks sleek.....comes in very handy to tune the bird in the field without a "Schlepp-Top"....


    Chris
    I don't get angry anymore....hoorey to the products of the pharma industry !

  4. #4
    Mr take no prisoners! PeteDee's Avatar
    Join Date
    Mar 2013
    Location
    Canberra, Australia
    Posts
    1,177
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Yum, I so want this for Android!!

    Have it for my Tarot ZYX-S controller, apparently coming for my 3GX, makes life very easy at the field.

    Pete
    Disco, Disco Pro, Spanky250, Q400-X
    DX18,14SG

  5. #5
    Full Blown Hucker BorisS's Avatar
    Join Date
    May 2011
    Location
    Austria, Vienna
    Posts
    3,435
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    What would be cool would be some more telemetry and maybe a HUD, but lets see what comes ! Gonna make a flight video this weekend when I maiden the x8 and use it to tune the gains !

    Boris

    (edit) yeah as far as i know they are coming out with a Android version !
    CS8 conversion to X8 DJI WK-M Herkules III V3 ESCs
    DW CX4, DJI WK-M Herkules II V3 ESCs
    S800 - Z15 Gimbal GH1/GH2 Version
    ----------------------------------------------------------------------------------------------------
    FPV: QAV500/NAZA - TBS Discovery/Naza - Hoverthings VC450 & HT-FPV NAZA/OP CC
    Building TBS DISXO X8 modded AD6 FC and ESC 32

  6. #6
    Full Blown Hucker BorisS's Avatar
    Join Date
    May 2011
    Location
    Austria, Vienna
    Posts
    3,435
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    By the way if you use the LED module. Take are that your IOS device as a 6.01 or above IOS version running. I was messing arround for a couple weeks having inconsistency when try to connect because I still had my Iphone on a 5.XX IOS version !

    Boris
    CS8 conversion to X8 DJI WK-M Herkules III V3 ESCs
    DW CX4, DJI WK-M Herkules II V3 ESCs
    S800 - Z15 Gimbal GH1/GH2 Version
    ----------------------------------------------------------------------------------------------------
    FPV: QAV500/NAZA - TBS Discovery/Naza - Hoverthings VC450 & HT-FPV NAZA/OP CC
    Building TBS DISXO X8 modded AD6 FC and ESC 32

  7. #7
    Approaching Solo Richardt1808's Avatar
    Join Date
    Mar 2013
    Location
    Bangkok
    Posts
    14
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Hi Boris,Where did you get your LED module from ? I've been keeping an eye for them online but most places only have pre-order.

  8. #8
    Full Blown Hucker BorisS's Avatar
    Join Date
    May 2011
    Location
    Austria, Vienna
    Posts
    3,435
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by Richardt1808 View Post
    Hi Boris,Where did you get your LED module from ? I've been keeping an eye for them online but most places only have pre-order.
    I got it as a test unit a couple week ago already, But i never got it to work ! But it wasnt DJI fault is was me not reading the instructions that you IOS device has to be updated to 6.01 version and i was on 5 something. Think copterworx should have them on the 30 th ! Boris
    CS8 conversion to X8 DJI WK-M Herkules III V3 ESCs
    DW CX4, DJI WK-M Herkules II V3 ESCs
    S800 - Z15 Gimbal GH1/GH2 Version
    ----------------------------------------------------------------------------------------------------
    FPV: QAV500/NAZA - TBS Discovery/Naza - Hoverthings VC450 & HT-FPV NAZA/OP CC
    Building TBS DISXO X8 modded AD6 FC and ESC 32

  9. #9
    Full Blown Hucker SMP's Avatar
    Join Date
    Jul 2012
    Location
    Miami Florida & Doha Qatar
    Posts
    854
    Blog Entries
    1
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Forgive my ignorance, but is this the LED module available as an upgrade to existing Naza-WKM/V1? or does this require WookongV2.
    Sequin Miner Photography - www.SequinMiner.com
    Droidworx SkyJib 8 | Droidworx AD6 - Modified to XY8 Coaxial | 550 Extended w Musky Brushless | "Kloner" TBS Disco | Coming Soon! Foldable X8 http://www.foxboxx.com/

  10. #10
    Full Blown Hucker BorisS's Avatar
    Join Date
    May 2011
    Location
    Austria, Vienna
    Posts
    3,435
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by SMP View Post
    Forgive my ignorance, but is this the LED module available as an upgrade to existing Naza-WKM/V1? or does this require WookongV2.
    I have it install on a normal WKM V1 with the latest firmware and assistant. It will not work with the naza. Naza doesnt have a physical can-bus socket were it would fit. If they are planning something for the naza I cant say !Boris
    CS8 conversion to X8 DJI WK-M Herkules III V3 ESCs
    DW CX4, DJI WK-M Herkules II V3 ESCs
    S800 - Z15 Gimbal GH1/GH2 Version
    ----------------------------------------------------------------------------------------------------
    FPV: QAV500/NAZA - TBS Discovery/Naza - Hoverthings VC450 & HT-FPV NAZA/OP CC
    Building TBS DISXO X8 modded AD6 FC and ESC 32

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •