Cinestar 6 - wkm build

[wbrown]

Specs:

Cinestar 6 frame kit
Modified Photohigher Fly Pod AV200 - 360 camera mount
Dji Wookong autopilot fc
Torxpower 3536 Pro motors + Hobbywing Pentium 40a ESC's
Spectrum DX8 tx - AR8000 Reciever and TM1000 telemetry module
Afropower distro board
2x Turnigy Nanotech 5000mah 4s and 2x Turnigy Nanotech 4000mah 4s batteries.

Basic flight control layout
1.jpg

Top mount from photohigher camera mount and cinestar camera mount plate

2.jpg

Match made in heaven
3.jpg

Telemetry moudule in place
4.jpg

Just some small notched taken out from the distro board and it fit in well.
5.jpg6.jpg

All built and ready to fly. Have only done some basic gain testing but it seams to work well.
Waiting on cc bec pro to power the camera gimbal and also waiting on some apc 12x6 thin electric props. The ones I have are two flimsy and vibrate a lot.


7.jpg8.jpg9.jpg10.jpg11.jpg

Thanks to Ken for all his help with my noob questions and also everyone who has gone before to trial components. Make's purcashing parts less of a stab in the dark.
Stay tuned for some sample video within the next few weeks.

Will

[seattle_helo]

Nice! What ESC's are those?

nick

[Garagelars]

Great job! I have an almost identical setup on my table.. You seem to be a couple of steps ahead, but I will be most interested in your progress!

I got the CS mount, that resembles the PH quite a lot, and I also went for the T MT2814 motors...

I will use my Graupner MX20, and it will be interesting to compare results with your setup.
(Will be posting some pics of my build soon)
//Lars

[hacksaw44]

What is the price of the Cinestar ?

[Tomstoy2]

That is nice, very nice indeed!

[heverson]

Do you have a video of the flying machine? And the stabilization of the camera wasgood?

[wbrown]

This showreel was filmed entirely using the set-up above: http://vimeo.com/38064150